Need help?Do you have a question about the Proxxon WP/E and is the answer not in the manual?
General| Idle speed (max) | 2500 RPM |
|---|---|
| Grinding disc diameter | 50 mm |
| Input power | 100 W |
| Power source | AC |
| AC input voltage | 220 - 240 V |
| Product color | Black, Green, Silver |
Weight and Dimensions| Length | 270 mm |
|---|---|
| Weight | 720 g |
Tool intended for sanding/polishing; not for grinding/wire brushing.
Use manufacturer-recommended accessories with correct speed/size/arbor fit.
Inspect bits for damage; run tool for 1 min to test for breakage.
Wear appropriate PPE like eye protection, dust mask, hearing protection.
Maintain safe distance, handle tool properly, keep clean, avoid hazards.
Clamp work securely when using rotary files, cut-off wheels, or carbide cutters.
Ensure polishing guard fastening cords are secure and not loose.
Use correct size sanding paper that fits the grinding disc.
Kickback is a sudden reaction to snagged accessories causing tool to be forced.
Maintain firm grip, use care with edges, avoid certain blades, feed tool correctly.
Powerful, compact angle polisher with two-stage gearbox and electronic speed control.
Details motor power, voltage, speed, dimensions, weight, and noise level.
Device is ready for use; check for wear before operation.
How to attach polishing tools to the rubber backing disc.
Secure workpiece, use uniform speed, do not cover vents, allow to cool.
Clean workpiece thoroughly before polishing, use sandpaper if needed.
Use polishing agent, choose correct agent for material, apply at low speed.
Accessories are available from Proxxon; use Proxxon bits for optimal function.
Contact dealer for repairs; mains power input replacement by service dept. only.
Clean unit with soft cloth after use; use mild soap for exterior.
Procedure to replace the rubber backing disc, disconnect power first.
Do not dispose of in household waste; recycle reusable materials.
Manufacturer declares product conformity with EU directives and normative documents.
To Next Page
