Prozone ECO MASTER - User Manual

Questions and Answers

G
George NguyenAug 3, 2025
What to do if Prozone Lighting Equipment has no light?
- W
  wurachelAug 3, 2025
  If your Prozone Lighting Equipment isn't emitting light, there are several potential causes. First, check all wiring connections to ensure they are secure. Second, verify that the unit is receiving power and that the voltage and power source are compatible. If these steps don't resolve the issue, the lamp or an internal component may be defective, requiring you to return the unit to the dealer.
A
albert89Aug 13, 2025
What to do if Prozone Lighting Equipment causes cloudy, foamy water, or scum?
- A
  Angela EllisAug 13, 2025
  If you observe cloudy or foamy water, or scum, when using the Prozone Lighting Equipment, it could be due to several reasons. It might indicate unbalanced water chemistry, so check the readings and adjust accordingly. Alternatively, the total dissolved solids (TDS) level might be too high, in which case you should consult your dealer for water testing. Finally, the filter may not be functioning correctly; try cleaning or replacing it.
M
Matthew WrightAug 22, 2025
Why Prozone ECO MASTER Lighting Equipment has no bubbles in return fitting?
- S
  Sarah MillerAug 23, 2025
  If you don't see bubbles in the return fitting or line of your Prozone Lighting Equipment, which indicates a lack of ozone, it might be due to excessive back pressure in the return line. Check both the supply and return line pressures, ensuring that the return line pressure does not exceed 10 PSI and is not greater than the supply line pressure. Adjust the pressure as needed.