7. We recommend using default factory settings, once the MENU has been set, then
connect the car charger to the unit and put into the card. Once the car is started, the
unit will automatically start recording. Once the car turns off, the unit will
automatically stop recording. Please note that your vehicle’s Cigarette Lighter Sockets
do not have any power when the ignition is switched OFF.
8. This dash cam must be continuously connected to a power supply via a 5V 1A
Charger because there is no built-in battery.
9. If you turn the option of SCREEN SAVER ON, in video recording mode, when the
screen is switched Off, the dash cam is still recording. You can turn the screen on by
pressing power button.
10. If you want to playback the videos, we recommend unplugging your micro SD card
and plugging into your PC with card reader. We recommend using VLC Video player on
Windows OS, and Movist + VLC on MAC OS.
11. After several weeks of daily recording it may be necessary for you to format your
Micro TF Memory Card - if that is the case, please note that you will lose all of your
files, so please back up a copy on your computer first in a unique dash cam Folder that
you have created.
12. When your dash cam crashes / screen goes black, the phenomenon may be caused by
improper operation, crash, please press the R = Reset button, hole by the top corner,
gently with a cocktail stick. Just like you would do for a computer, printer, phone, etc.
13. We recommend formatting your micro SD card once a month, and replace the micro
SD card every three months because the memory card has a certain number of reads
and writes, if it reaches the numbers, the micro SD card can't be used.
To Next Page
Loading...
