Resolution
Recommend setting: 720P
Use the following procedure to set the recording resolution:
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Resolution" option
3. Press OK to view available resolutions: 720 / WVGA / VGA
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit Video Settings
Loop Recording
Recommend setting: 1 Minute
With Loop Recording Mode enabled, the device will continuously erase
older video as it records new video, keeping only the images captured
over a user-selected time range. All video older than this range will be
replaced with new video. (Note: any locked video files on the memory
card will remain protected, and will not be automatically deleted during
Loop Recording.)
It is recommended that you reformat a memory card after every time
that images are transferred from it to a computer, or at least once a
month. This keeps important elements of data and file structure clean,
helping to prevent error messages and missing images.
Remember to always make backup copies of all important data stored
on the device. The manufacturer’s warranty does not cover loss of data
resulting from user actions.
To Next Page
Loading...
