Pruveeo MX2 - Date Stamp Setting; Enabling;Disabling Date Stamp

© 2018 PRUVEEO All Rights Re s er v ed .
16
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Loop Recording"
option
3. Press OK to view the current selection: 1 minute / 2 minutes / 3
minutes
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit Loop Recording Settings
Date Stamp
You have the option to display the date and time in your videos. Note
that the date and time stamp cannot be removed from videos if this
feature was enabled at the time of recording.
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Date Stamp"
option
3. Press OK to view the current selection
4. Press the UP or DOWN button to enable or disable this feature
5. Press OK to confirm your entry
6. Press MENU to exit Date Stamp Settings