PRV Audio DSP 2.4X - System Tools and Customization; Tone Generator and Frequency Sweep; Sequencer for Product Activation; Screensaver and Language Options

12 13
Frequency Sweep: Allows you to perform a frequency scan, with the opon of
selecng the inial and nal frequency, gain, scanning speed and ON/OFF.
When acvang the sweep enters a connuous cycle, to close it simply press
any of the HOTKEYS or move the MAIN CONTROL.
TONE GENERATOR
freq: 100 Hz
TONE GENERATOR
gain: -45.0 dB
TONE GENERATOR
OFF [ON]
FREQUENCY SWEEP
start: 10 Hz
FREQUENCY SWEEP
end: 22000 Hz
FREQUENCY SWEEP
speed:medium
FREQUENCY SWEEP
gain: -45.0 dB
FREQUENCY SWEEP
OFF [ON]
Tempo / Time
Amplitude
• Screensaver
The audio processor has a screensaver
funcon, which allows the user to dene a
15-character scrolling text.
SCREENSAVER
PRV DSP2.4X
• Language
You can select from the following operang
languages: English, Spanish and Portuguese.
LANGUAGE
<< ENGLISH >>
• Sequencer
This feature allows you to acvate several products sequenally.
The sequencer has three outputs (S1, S2 and S3) that are acvated and deacvated
sequenally according to the input signal of the remote input (REM IN).
The acvaon interval between each
output can be congured from 0s to 4s.
When the congured me is 0s, the three
outputs will be enabled and disabled at the
same me, aer 3s of the absence of the
remote signal at the input (REM IN).
To connect the remote signals, use cables
of at least 20 AWG.
It is possible to turn ON/OFF each
sequencer output independently.
When the output is turned o, it will not
trigger when the processor is turned on
again.
MAIN MENU
Sequencer
SEQUENCER
ON/OFF
SEQUENCER
S1: ON
SEQUENCER
Time
SEQUENCER
Time : 2.0 s
Radio /
Player
Baery
Example of installing the "SEQUENCER" feature:
PRV AUDIO
AMPLIFIER 2
AMPLIFIER 3
AMPLIFIER 1