®
Owner’s Reference Sprout
4826 Sterling Drive, Boulder, CO 80301 . PH: 720.406.8946 . www.psaudio.com
©2014 PS Audio Inc. All rights reserved.
Settings or Speaker Settings. Change it to the Audio System setting
which disables the television’s internal speakers and sends the sound to
Sprout.
The goal here is to disable the TV Speakers and use the Audio System.
We don’t want music or programming to come out of the television’s
speakers. We only want it going into Sprout.
Some TV’s have xed analog outputs. It’s usually written right on the
back of the TV next to the connectors. When you are connected, if the
remote control doesn’t change the volume through Sprout automatically,
bummer, you will need to change the volume on Sprout’s front panel by
hand. Cool?
However, your TV may have variable analog outputs. This means when
you use the TV’s remote to control the volume, it changes the amplitude
of the line-level signal. If your TV has variable line-level outputs, rock
and roll. You can use the TV’s remote to control the volume AND you
can use Sprout to control the volume. That’s called secondary volume
and master volume, respectively.
To Next Page
Loading...
