5
2. Product Features And Specifications
This alarm detects particles of combustion using photoelectric technology. This smoke alarm has an expected
service life of ten years under normal conditions. We recommend that you should replace after 10 years from
installation date to ensure normal operation.
Product Features and Specifications:
• MODEL 6800: Powered by 240VAC (50Hz, 10 mA max, 4mA standby) hardwire with 9V replaceable battery
backup
• MODEL 6800RL: Powered by 240VAC (50Hz, 10 mA max, 4mA standby) hardwire with built-in
rechargeable battery backup
• Advanced sensing and intelligence to help reduce nuisance alarms.
• Anti-static chamber to repel dust from the sensor.
• Temperature: Operating Range: 0 °C to 40 °C
• Humidity: Operating range: up to 93% RH non-condensing
• Audible Alarm: 85+ dBA at 3m @ 3.0 to 3.5 KHz pulsing alarm
• Smoke Sensor: Advance Photoelectric technology
• Single TEST HUSH control button
• Stand alone operation or Interconnectable up to 24 units
• Insect mesh protection over sensor.
• Quick slide base plate for easy installation
• Low battery hush for 8 hours.
• Initiating alarm memory feature.
• Chamber fault monitoring
• Approved to AS3786:2014 Australian Standard
• Wireless interlink and remote controller using optional wireless baseplate.
To Next Page
Loading...
