Need help?Do you have a question about the PSB CHS212 and is the answer not in the manual?
Instructions for registering the product warranty online or via mail.
Guidance on cleaning the subwoofer cabinet, grilles, and ports.
Discusses the challenges of low-frequency response and room interaction.
Explains optimal subwoofer positioning for bass output and room modes.
Discusses the benefits and placement strategies for using two subwoofers.
Details how to adjust volume, crossover, and phase for optimal sound.
Instructions for installing rubber levelers or spikes for carpet or hard floor use.
Adjusts the output level of the subwoofer, not for daily volume adjustments.
Indicates when the subwoofer is active or in standby mode.
Details connecting the subwoofer to an AC power outlet.
Adjusts the high-frequency roll-off for matching with main speakers.
Selects subwoofer output phase (0° or 180°) for acoustic compensation.
Bypasses the subwoofer's filter for receiver/processor crossover control.
Connects the subwoofer to preamplifiers or integrated amplifiers at line level.
Connects the subwoofer to receivers/amplifiers with speaker outputs.
Turns the subwoofer on and off; can be left on for auto-sensing.
Provides cooling for the internal amplifier, requires air circulation.
Supplies AC power; connects to standard wall outlet.
Location and replacement procedure for the external fuse.
Details connecting to A/V receivers or processors via subwoofer/LFE output.
Connects to preamplifier outputs using RCA cables, can use sub outputs to main speakers.
Connects to speaker outputs using standard speaker cable.
Discusses using two subwoofers to improve bass response and smooth room anomalies.
To Next Page
General
