PSB SubSeries 6i - User Manual

SubSeries 6i,
SubSeries 5 i,
SubSeries 1,
Powered Subwoofers
OWNER'S GUIDE
I. IMPORTANT SAFETY INSTRUCTIONS
II. INTRODUCTION
III. QUICKSTART
IV. FEATURES, CONTROLS, AC POWER
A. Sub Volume Control (Figure 1)
B. On Indicator Light (Figure 1)
C. AC Power Connection
D. Sub Cut-Off Frequency Control (Figure 1)
E. High/Speaker Level Terminals (Figure 2)
F. AC Power Socket (Figure 2)
G. External Fuse (Figure 2)
H. Low/Line Level Jacks (Figure 2)
I. Phase Switch (Figure 2)
J. LFE Input/Crossover Bypass Switch (Figure 2)
K. Power Switch (Figure 2)
L. Amplifier Panel (Figure 2)
V. ROOM ACOUSTICS, SUBWOOFER PLACEMENT, MULTIPLE SUBWOOFERS &
SETTING THE CONTROLS
VI. CONNECTING THE SUBWOOFER TO YOUR AUDIO SYSTEM
A. The SubSeries 1
B. The SubSeries 5i
C. The SubSeries 6i
D. Using Multiple Subwoofers
VII. SET-UP CALIBRATION
VIII. SPECIFICATIONS
www.psbspeake~.com· Ph.,,: (888) 772-00oo.r (905) 831-8555 IE

PSB SubSeries 6i Specifications

General

Type	Powered Subwoofer
Amplifier Power	150 Watts RMS
Dynamic Peak Power	300 Watts
Phase Control	0/180 degrees
Crossover Frequency	50-150 Hz
Driver Size	10 inches
Frequency Response	27-150Hz
Inputs	LFE
Crossover	Variable 50Hz - 150Hz
Dimensions (H x W x D)	14 1/8 x 13 3/8 x 15 3/4”
Weight	14.5 kg
Woofer	10-inch Polypropylene