Need help?Do you have a question about the PSB HD10 and is the answer not in the manual?
Instructions for safely removing the subwoofer from its packaging.
Understanding how room dimensions affect low-frequency sound reproduction.
Guidance on optimal positioning for best bass response and uniformity.
Benefits and placement strategies for using two subwoofers.
Adjusting crossover frequency for optimal blending with main speakers.
Adjusts the output level of the subwoofer.
Allows external voltage to turn the subwoofer on/off.
Sets the high-frequency roll-off for precise matching with main speakers.
Adjusts phase to achieve smoothest transition with main loudspeakers.
Connects to preamplifiers or integrated amplifiers at line level.
Connects to processors with full bass management for LFE signals.
Connects to receivers or integrated amplifiers via speaker outputs.
The metal panel provides cooling for the internal amplifier.
Indicates power status: Red for standby, Green for on.
Connects the supplied power cord for AC power.
Details on powering the subwoofer via AC outlet.
Main power switch located at the back of the unit.
Location and replacement instructions for the external fuse.
How to connect to A/V receivers or processors using RCA cables.
Using pre-out jacks of amplifiers/receivers with RCA cables.
Using speaker outputs of receivers/amplifiers with speaker wire.
Wiring strategies for connecting two subwoofers.
General| Type | Powered Subwoofer |
|---|---|
| Inputs | Line-Level (RCA), Speaker-Level |
| Outputs | Speaker-Level |
| Enclosure Type | Bass Reflex |
| Frequency Response | 30-150Hz |
| Crossover Frequency | 50Hz - 150Hz (adjustable) |
| Phase | 0 / 180 degrees |
| Woofer (size, type) | 10" (250mm) Polypropylene Cone |
To Next Page
