PSB SubSeries 1 - User Manual

SubSeries 6i,
SubSeries 5 i,
SubSeries 1,
Powered Subwoofers
OWNER'S GUIDE
I. IMPORTANT SAFETY INSTRUCTIONS
II. INTRODUCTION
III. QUICKSTART
IV. FEATURES, CONTROLS, AC POWER
A. Sub Volume Control (Figure 1)
B. On Indicator Light (Figure 1)
C. AC Power Connection
D. Sub Cut-Off Frequency Control (Figure 1)
E. High/Speaker Level Terminals (Figure 2)
F. AC Power Socket (Figure 2)
G. External Fuse (Figure 2)
H. Low/Line Level Jacks (Figure 2)
I. Phase Switch (Figure 2)
J. LFE Input/Crossover Bypass Switch (Figure 2)
K. Power Switch (Figure 2)
L. Amplifier Panel (Figure 2)
V. ROOM ACOUSTICS, SUBWOOFER PLACEMENT, MULTIPLE SUBWOOFERS &
SETTING THE CONTROLS
VI. CONNECTING THE SUBWOOFER TO YOUR AUDIO SYSTEM
A. The SubSeries 1
B. The SubSeries 5i
C. The SubSeries 6i
D. Using Multiple Subwoofers
VII. SET-UP CALIBRATION
VIII. SPECIFICATIONS
www.psbspeake~.com· Ph.,,: (888) 772-00oo.r (905) 831-8555 IE

Summary

I. IMPORTANT SAFETY INSTRUCTIONS

General Safety Warnings

Covers general safety advice, warnings, and instructions for safe operation and maintenance of the product.

Electrical Safety Symbols

Explains the meaning of warning symbols related to electrical hazards and operating instructions.

Environmental Protection Notes

Provides guidance on the proper disposal of the product at the end of its lifecycle.

II. INTRODUCTION

PSB Subwoofer Design Philosophy

Details PSB's approach to subwoofer design, focusing on musicality, performance, and proprietary limiting circuitry.

SubSeries 1 Features

Highlights unique features of the SubSeries 1, including front-mounted controls and its amplifier.

SubSeries 5 i Overview

Describes the SubSeries 5i, emphasizing its higher power, Class H design, and improved transient response.

SubSeries 6 i Overview

Details the SubSeries 6i, noting its larger drivers, greater power, and enhanced installation flexibility.

III. QUICKSTART

Initial Setup Procedure

Provides a step-by-step guide for connecting and powering on the subwoofer for initial use.

IV. FEATURES, CONTROLS, AC POWER

Sub Volume and Cut-Off Frequency Controls

Explains the function of the Sub Volume and Sub Cut-Off Frequency controls on the front panel.

On Indicator Light Function

Describes the standby mode and how the indicator light signals audio signal presence.

AC Power Connection and Socket

Details how to connect the power cord and information about the AC power socket.

High;Speaker Level Terminals

Explains how to connect the subwoofer using speaker-level inputs from an amplifier.

Power Switch and Amplifier Panel

Describes the power switch operation and the function of the amplifier panel for heat dissipation.

Low;Line Level Jacks

Details the connection points for low/line level audio signals via RCA jacks.

Phase Switch Operation

Explains the purpose and adjustment of the 0°/180° phase switch.

LFE Input;Crossover Bypass Switch

Describes the function of the LFE input and bypass switch for external crossover control.

External Fuse Access

Provides instructions on how to access and replace the external fuse.

V. ROOM ACOUSTICS, SUBWOOFER PLACEMENT, MULTIPLE SUBWOOFERS & CONTROL SETTINGS

Understanding Room Acoustics and Bass Response

Explains how room size, shape, and reflections impact low-frequency sound reproduction.

Standing Waves and Room Modes

Details how parallel surfaces create standing waves, affecting bass peaks and nulls.

Subwoofer Placement Strategies

Discusses optimal subwoofer positioning for maximum bass output and even response.

Optimizing Bass Response with Placement

Guides on dealing with null spots and peaks by adjusting placement or listening position.

Multiple Subwoofers for Improved Bass

Explains the benefits of using two subwoofers and their placement for better bass performance.

VI. CONNECTING THE SUBWOOFER TO YOUR AUDIO SYSTEM

Control Settings for Optimal Sound

Guidance on fine-tuning subwoofer performance using crossover, level, and phase controls.

Low;Line Level Connection Guide

Details recommended RCA connections for integrating the subwoofer with audio systems.

High;Speaker Level Connection Guide

Explains how to connect the subwoofer using speaker-level outputs from an amplifier.

SubSeries 1: Home Theater Connection

Specific instructions for connecting the SubSeries 1 to home theater receivers via LFE.

SubSeries 1: Stereo Low;Line Level Connection

Instructions for connecting the SubSeries 1 to stereo systems using pre-out jacks.

SubSeries 1: Stereo High;Speaker Level Connection

Instructions for connecting the SubSeries 1 to stereo systems using speaker outputs.

SubSeries 5 i Connection Options

Details connection methods for the SubSeries 5i, referencing SubSeries 1 where applicable.

SubSeries 6 i Connection Options

Details connection methods for the SubSeries 6i, covering low/line and high/speaker levels.

SubSeries 6 i High;Speaker Level Output

Explains the high-pass filter on the SubSeries 6i's speaker-level outputs.

Using Multiple Subwoofers

Provides wiring guidance for connecting two subwoofers to the system.

VII. SET-UP CALIBRATION

Calibration Procedure Overview

Outlines the general steps for installing and calibrating the PSB subwoofer.

Setting Sub Volume and Cut-Off Frequency

Detailed steps for adjusting volume and crossover for optimal mid-bass blend.

Phase Control Adjustment

Guidance on adjusting the phase control for maximum low to mid bass output.

Fine-Tuning Subwoofer Blend

Tips for adjusting controls to achieve musical performance without boom or gaps.

Sub Volume Control Usage Note

Clarifies that Sub Volume is a set-and-forget adjustment, not for daily use.

VIII. SPECIFICATIONS

SubSeries 1 Specifications

Detailed technical specifications for the SubSeries 1 model.

SubSeries 5 i Specifications

Detailed technical specifications for the SubSeries 5i model.

SubSeries 6 i Specifications

Detailed technical specifications for the SubSeries 6i model.

LIMITED WARRANTY

Warranty Coverage and Exclusions

Outlines what parts and labor are covered and what is excluded from the warranty.

Obtaining Warranty Service

Provides instructions on how to get service and what proof is required.

Implied Warranties and Damages

Discusses limitations on implied warranties and liability for damages.

PSB SubSeries 1 Specifications

General

Type	Powered Subwoofer
Woofer Material	Polypropylene
Amplifier Power	100 Watts RMS
Crossover Frequency	50 Hz - 150 Hz
Outputs	Speaker-level
Enclosure	Bass Reflex
Inputs	Line-level, Speaker-level
Driver Size	10 inches