Why PSE Ultrasonic Jewelry Cleaner suction power reduction?
The PSE Ultrasonic Jewelry Cleaner might experience reduced suction power due to a full dust cup or an unclean filtration assembly. Clean the dust cup and filtration assembly, ensuring the filtration assembly is dry before use. Unstable power supply voltage can also cause this issue. Use the machine when the voltage is stable.
What to do if PSE LW-P1003 Ultrasonic Jewelry Cleaner doesn't power on?
If your PSE Ultrasonic Jewelry Cleaner doesn't power on, first ensure the plug is correctly inserted into the socket and that the socket has power. Also, verify that the ON/OFF switch is pressed to the 'on' position.
Why is there dust blown out during use of PSE LW-P1003 Ultrasonic Jewelry Cleaner?
Dust may be blown out during use of the PSE Ultrasonic Jewelry Cleaner if the filtration system assembly is not correctly installed, specifically if the HEPA filter is missing. Replace the filtration assembly and install the HEPA filter in the correct position.
Why PSE LW-P1003 Ultrasonic Jewelry Cleaner UV lamp not on?
The UV lamp on the PSE Ultrasonic Jewelry Cleaner may not be on because the safety switch wheels are not in contact with the object's surface. Ensure that the safety switch wheels are making contact with the surface of the object being cleaned.
Identifies and labels the main parts and components of the dust mite cleaner.
Instructions for cleaning the HEPA filter and filtration system components.
Guidance on how to clean the exterior of the dust mite cleaner safely and effectively.
General| Brand | PSE |
|---|---|
| Model | LW-P1003 |
| Category | Ultrasonic Jewelry Cleaner |
| Language | English |
To Next Page