PSE LW-P1003 - Cleaning and maintenance; Cleaning of filtration system; Cleaning of the machine

- 5 -
Cleaning and maintenance
⚫ Cleaning of filtration system
Hold the dust cup handle and take it out from the machine (Figure 1), then rotate the HEPA
filter assembly anticlockwise to take out (Figure 2), take out the filter from the HEPA filter
assembly, brush the dust out of the gap of the HEPA filter with brush, or gently tap the HEPA
filter to clean the dust out, if necessary, clean HEPA filter with clear water (Fig. 4), then dry it
naturally before using;
⚫ Cleaning of the machine.
1.Shut down the machine and pull the power cord plug out of socket before cleaning and
maintenance.
2.Clean the dust cup frequently to avoid machine failure.
3.Do not scrub the surface of the machine with gasoline or oil. It shall be scrubbed with soft
cloth or neutral detergent. The scrubbing cloth must be screwed dry and water shall not
penetrate into the electrical components of the machine.
4.Tie up the power cord and place it with the machine in dry area.
5.Do not stack heavy objects above the machine。