2
Your Caddy furnace can be equipped with an optional oil unit. This option can be installed on
either side of your furnace. It is important to note that the default configuration of your furnace
features the oil unit installed on the right side of your furnace. It is possible to install the oil unit
on the left side but requires additional steps.
Please note that the installation on the furnace is carried out in an identical way for both Beckett
and Riello units. For electrical connections, refer to “Electrical connections” section.
Installation must be performed by a qualified technician.
SECTION 1 - INSTALLATION INSTRUCTIONS
Step 1. Remove the left panel (A) and the right panel (B) of the furnace by removing the screws
that hold them in place (C) (22X). Keep the screws. Discard the panels.
To Next Page
Loading...
