12286 Rev 2 Page 2
Warranty Policy
Progressive Technologies Inc (PTI) warrants its Air-Flow Control systems to be free from
defects in material and workmanship for a period of TWELVE months from the date of
shipment from the PTI factory. If within the period of this warranty, the equipment should fail
due to such a defect, the customer should call the PTI factory to obtain a return authorization
number and return the defective system to the PTI factory. The customer shall be responsible
for returning the product to PTI in a condition that is free of any residual process chemicals,
gasses, deposits or other materials that are hazardous to human contact. PTI will repair the
product or exchange it for a new, or product rebuilt to new condition, at no charge.
Repair service will be performed according to normal repair lead-time. The Customer will
assume the cost of shipping the product to PTI. PTI will assume the cost of returning the
product to the customer.
The Customer shall be responsible for all the current and applicable PTI rate(s) for service and
parts furnished hereunder and required because of, or attributed to, Customer’s improper use
of the equipment, lack of prescribed preventive maintenance, failure of or caused by parts not
supplied by PTI, failure of or improper electrical power, alteration or modification,
transportation, vandalism, fire, chemicals or other casualty; causes other than ordinary use;
improper servicing or reinstallation, without prior written approval from PTI.
The sole responsibility and liability of PTI under this warranty shall be to provide service as
described above. PTI makes no other warranty, expressed or implied, and disclaims any
implied warranties or of merchantability and fitness for particular purpose.
Documentation
This document contains information belonging to Progressive Technologies Inc. (“PTI”). This
information is not for publication and has been provided to PTI’s customers on the condition
that it not be copied or reproduced either wholly or in part, to third parties without the
expressed written consent of PTI.
The information contained in this document is subject to change without notice. The SENTRY
TIM-100/120/200 and related SENTRY technology is covered by one or more of the following
patents: U. S. Pat Nos. 5,000,221; 5,220,940; 5,251,654; 5,255,709; 5,255,710; 5,320,124;
5,450,873; 5,456,280; 5,582,203; 5,597,011; 5,634,490; 5,655,562; and 5,664,600 and
European Pat. No. 0 491 684. Other patents are pending.
To Previous Page
Loading...