EasyManua.ls Logo

Puffco PEAK - Tips and Tricks; Sesh Mode; Warnings

Puffco PEAK
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TIPS AND TRICKS:
WARNINGS:
- Do not forcefully remove the bowl, submerge whole
atomizer in iso while fully assembled.
- Do not handle atomizer and bowl after use. Allow
time to cool.
- Atomizer buzzing is normal, don’t worry.
- Do not allow water in the bottom chamber of glass.
- Do not let water seep into the atomizer.
- Do not store device with water in the glass.
- Attach / detach glass carefully, do not force.
- Several short inhales produce more vapor.
- Do not overfill the bowl.
- Do not charge or operate below 32° F or above 100° F.
- Keep away from moisture and high humidity.
- Store in a cool dark place when not in use.
Sesh Mode:
Haven’t reached your peak? We’ve got you covered.
We created a sesh mode that increases heat and
extends your session by 15 seconds. Use it to boost
heat, or to share with your friends.
If vapor production is low, double click to initiate
sesh mode. Still not enough? Damn you’re
hardcore, so sesh again! You can double click as
many times as you want to keep the session going.
Multicolored light flash: Indicates poor or no
connection between the base and atomizer.
3 red flashes: Indicates low battery.
5 light flashes: Indicates short circuit.
Red light holds: Device overheated.
- PUFFCO QUALITY GUARANTEE -
11

Related product manuals