7. SERVICE
• When cleaning and servicing the machine, you must switch off the machine and remove the plug from
the outlet.
• Avoid cleaning with a high pressure cleaner. If necessary, do not direct at the openings on the machine,
especially the opening for cooling air.
• Before moving the machine from the work area, the machine must be cleaned.
• All other equipment must be regarded as contaminated and be treated thereafter.
• If possible, use a special suitable room.
• Proper personnel protective equipment must be used. Dust can be spread when the coarse filter and the
absolute filter are replaced that can be hazardous to health. Accordingly, the user should wear protective
glasses, protective gloves, and a breathing mask conforming to protection class FFP3.
• All parts which are contaminated after service must be properly disposed of in plastic bags according to
all regulations.
• If the machine has to be used for other purposes, it is extremely important that the machine is cleaned,
to avoid the spread of hazardous dust.
• Do not puncture the Hepa filter. Risk of dust dispersion.
Replacement parts, Filters and Dust collection system
8. WARRANTY
All Pullman Ermator devices and accessories have a 12-month factory warranty for material and manufacturing
defects. The warranty extends to 36 months when returning the attached warranty slip. Do not attempt to repair
the suction apparatus without the consent of the manufacturer.
The warranty does not cover defects which are the result of normal wear and tear, negligence, defective use,
unauthorised repair or the suction apparatus being connected to the incorrect voltage.
In the event of any complaint, the suction apparatus or an agreed part of it must be returned to us or our
authorised representative for warranty examination and for any warranty repair or replacement.
To Next Page
Loading...
Need help?
General
