EasyManua.ls Logo

pullman Ermator S1300 - Warranty

Default Icon
24 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Revision 7
9
Service
When cleaning and servicing the machine, you must switch off the machine and remove the
plug from the socket.
Avoid cleaning with a high pressure cleaner. If necessary, do not direct at the openings on the
machine, especially the opening for cooling air.
Before moving the machine from the work area, the machine must be cleaned.
All other equipment must be regarded as contaminated and be treated thereafter.
If possible, use a special suitable room.
Proper personnel protective equipment must be used.
All parts which are contaminated after service must be properly disposed of in plastic bags
according to all regulations.
If the machine has to be used for other purposes, it is extremely important that the machine is
cleaned, to avoid the spread of hazardous dust.
Accessories
Part.no. Description No./machine
1276008 Bag (25-pack) 1 pcs
1337063 Main filter (cellulose) 1 pcs
1337062 Main filter (polyester) 1 pcs
200700070 HEPA 13 filter 1 pcs
For other spare parts, see the enclosed spare parts list.
Warranty
All Pullman-Ermator devices and accessories have a 12-month factory warranty for material and
manufacturing defects. The warranty extends to 36 months when returning the attached warranty slip.
Do not attempt to repair the suction apparatus without the consent of the manufacturer.
The warranty does not cover defects which are the result of normal wear and tear, negligence,
defective use, unauthorised repair or the suction apparatus being connected to the incorrect voltage.
In the event of any complaint, the suction apparatus or an agreed part of it must be returned to us or
our authorised representative for warranty examination and for any warranty repair or replacement.