4
Operating
the Appliance
4.1
Connection
to
Mains
Supply
Plug the steam cleaner's mains pluS
(Fis.
20) and switch the appliance on
(Fis. 2l).
into a propery installed socket
by pressing the On/Off switch
4.2
Using the
Steam Cleaner
NATE:
/r\
l_i_-\
The green openting piot lamp and
the orange heating
pilot
amp
(Fig.2l) ight up. The operating pilot lamp lights
up as soon as the
Steam Works has been plugged ;n and
switched on.
The
heating
pilot
lamp indicates that the steam cleaner is
currently
heating
up. The
oPefating temperature is reached after approx. | | minutes
and the
orange heatlng
Pilot
lamp
Soes
out- The app iance is now ready for use.
Warning:
Never
aim the steam outlet ol the steam
gun
at
people,
animals,
plants
or electrical systems
(e.9.
oven or wiring).
There is
a
risk
of scalding or electric shock!
Release the locking device (ch ld proof dev.e) by pushing the yeiow
triangular
pin
on the dght-hand slde of the steam gun i. bwards the
left
(Fig.
22). Hot steam now escapes if the steam button is operated.
First
of al hold the steam
gun
over an old cloth to absorb any initial
spray water. Operate the steam button undl the steam is emitted
eYenly.
Ceaning can now begin.
Caution:
Always test the steam cleaner first on inconspicuous
or non visible areas of the surfaces or fabrics to be
cleaned to check theirtolerance to hot steam.
-
Steam may resu t in bleach ng of painted/varnished wood.
-
Steam may discolour shiny plastics.
-
Acrylic. velver and inen react very sensitively
to the temperature of
-
Do not use the steam cleaner on Dralon fib.es without first having
carried out a sukability test on a concealed a.ea
For understandable reasons, the rnanufacturer cannot be held respon-
sible for damage to objects, n-iatedals, people, animak or plants thar
occurs due to unsuitable use o{ hot steam or due to improper use ofrhe
appliance. lf unsure ofan item\ suitabiiry do not use on fiat ltem.
To Next Page
Loading...
Need help?
General
