Need help?Do you have a question about the PULOX PO-200 and is the answer not in the manual?
General| Type | Pulse Oximeter |
|---|---|
| Battery Life | approx. 30 hours |
| Weight | 50 g (including batteries) |
| Power Supply | 2 AAA batteries |
| Operating Temperature | 5°C to 40°C |
| Parameters | SpO2, Pulse Rate |
Provides guidelines for safe operation and maintenance of the pulse oximeter.
Lists potential hazards and precautions, including explosive risks and material allergies.
Details environmental factors, handling, and usage precautions for accurate measurements.
Specifies the intended use of the pulse oximeter for spot-checking oxygen saturation.
Highlights the product's simplicity, portability, low power consumption, and display features.
Outlines suitable environments and user groups for the pulse oximeter, excluding continuous monitoring.
Specifies temperature, humidity, and atmospheric pressure requirements for storage and operation.
Explains the photoelectric oxyhemoglobin inspection technology using light absorption.
Provides crucial cautions regarding finger placement, sensor alignment, and avoiding interference.
Details clinical conditions and substances that may affect SpO2 measurement accuracy.
Details measurement accuracy, performance in weak filling conditions, and resistance to light.
Specifies the wavelengths and power of the red and infrared light used by the optical sensor.
Lists the accessories provided with the pulse oximeter.
Provides instructions for installing the device, including front panel overview and battery setup.
Instructions for attaching and securing the hanging rope to the device.
Details the correct procedure for placing the finger, operating the device, and keeping it still.
Provides instructions for cleaning the device surface with medical alcohol and disinfection.
Details guidelines for storing the device, including battery removal and environmental conditions.
Addresses issues like no display, unstable readings, power failure, and sudden display off.
Explains the meaning of various symbols used on the device and in the manual.
Describes the display modes for SpO2, pulse rate, and pulse intensity.
Details the measuring range, accuracy, and optical sensor specifications for SpO2.
Details the measuring range, accuracy, and display for pulse rate parameters.
Specifies the battery type and quantity required for the device operation.
Declares electromagnetic emissions compliance for all equipment and systems.
Declares electromagnetic immunity compliance for equipment and systems.
To Next Page
