Puls DIMENSION UB Series - Physical Dimensions and Weight

UB40.241
UB-Series
24V, 40A, DC-UPS
Jun. 2020 / Rev.0.1 DS-UB40.241-EN All values are typical figures specified at 24Vdc input voltage, 40A output current in
power supply mode at 25°C ambient, no charging and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
23/34
21. PHYSICAL DIMENSIONS AND WEIGHT
Width
46mm 1.81’’
Height
124mm 4.88’’
Depth
127mm 5.0’’
The DIN-rail height must be added to the unit depth to calculate the total required installation
depth.
Weight
530g / 1.17lb
DIN-rail
Use 35mm DIN-rails according to EN 60715 or EN 50022 with a height of 7.5 or 15mm.
Housing material
Body: Aluminium alloy
Cover: zinc-plated steel
Installation clearances
See chapter “Installation Instructions”
Penetration protection
Small parts like screws, nuts, etc. with a diameter larger than 4mm
Fig. 21-1 Front view
Fig. 21-2 Side view
All dimensions in mm
All dimensions in mm