Puls FIEPOS FPS300 Series - User Manual

FPS300.245-049-102
All parameters are specified at 24V, 12.5A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
Apr. 2022 / Rev. 0.1 DS-FPH500-EN www.pulspower.com 1 / 28
•
IP 65/67 Degree of protection
•
600 W
peak
5 s
•
1AC 100-240 V wide-range input
•
3 switchable outputs
•
Outputs for actors and sensors shares one channel
•
95.7 % full load and excellent partial load efficiencies
•
DIN rail mounting possible, option “D”
•
Output connected to PE (PELV)
•
Version without connection to PE on request
•
Large output capacitors
•
Not potted
•
Negligible low input inrush current surge
•
Full power between -25 °C and +55 °C
•
Output OK
•
3 years warranty
The FPS300 is an industrial grade power supply for the
1-phase mains system, it is incorporated into a rugged
wall-mount housing with an IP65/67
degree of
protection.
It provides two to four stabilized outputs that are
galvanically separated from the input. The negative
potential of the outputs is permanently connected to
PE within the unit.
The most outstanding features of the FPS series are the
compact size, the wide operating temperature range,
the extremely low input inrush current and the very
high efficiencies, which are achieved through various
design technologies. Large
output capacitors can
absorb and store regenerative energy from breaking
motors.
Various connector options support the different needs
of individual applications. Please contact PULS for
possible options. High immunity to transients and
power surges as well as low electromagnetic emissions
and an international approval package makes the use
in nearly every application possible.
Output voltage
DC 24
V
Nominal
Adjustment range
24-28 V
Factory setting 24.5 V
O
utput power
Continuous:
Up to:
360 / 300 / 150 W
+45 / +55 / +70 °C
Short term up to 5
s
600 / 300 W
+55 / +70 °C
Derate linearly
+55 °C to +70 °C
Number of output
3
Output currents
Settable per output; up to 10 A
Input voltage
AC
1
AC 100-240 V
-
15 / +10 %
Input voltage DC
DC 110-300 V*)
±20 %
Power factor
0.99 / 0.97
At 120 / 230 Vac
AC Inrush current
2.6 / 6
A
peak
At 120 / 230
Vac
Efficiency
9
4.3 / 95.7 %
At 120 / 230
Vac
Losses
18.1 / 13.5 W
At 120 / 230 Vac
Hold-up time
44 / 44 ms
At 120 / 230 Vac
Temperature range
-
25 °C to +70 °C
Size (wxhxd)
181x183x59 mm
Without connectors
Weight
1200
g / 2.7 lb
*)
For DC supply voltages above 150
Vdc an external fuse is
required.
Description:
Power supply FPS300
Order Number
Input
Output
FPS300.245-049-102*
7/8" 3pin
7/8” 4pin
Accessories:
Chapter 21
Related Products
Chapter 22
*For DIN rail mounting PSU: (Order Number)D
e.g. FP
300.245-049-102D
For details or a complete approval list, see chapter 21.
IEC 62368-1
IEC 61010-2-201
Input AC 100-240V
FPS300.245-049-102
IP
65/67
OUT1
OUT2
OUT3
OU T 3
OU T 2
OU T 1
28V
27V
26V
25V
24V
DC-OK
POWER SUPPLY 100-240Vac 24V 300W
GENERAL DESCRIPTION SHORT-FORM DATA
ORDER NUMBERS
MAJOR APPROVALS AND CONFORMITY

Puls FIEPOS FPS300 Series Specifications