EasyManua.ls Logo

Pulsar APXV3 WAX - User Manual

Pulsar APXV3 WAX
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Thank you for purchasing the Pulsar
®
APX Wax V3!
In order to ensure safe use, please read all instructions
and safety warnings before operating. Failure to follow
instructions may result in injury and may void your warranty.
PU-0276-20
PulsarVaporizers.com
FEATURES
Pure Quartz Cup Chamber
Triple Quartz Coils
Enhanced LED Display
2-Click Hands-free Power Mode
TECH SPECS
Size: 32mm x 23mm x 94mm
Input: DC 5V/1.0A
Battery Capacity:1100mAh Class A Lithium Battery
Atomizer Resistance: 0.7Ω
Battery Recharge Cycle Count: 300
Full Metal
Mouthpiece
Triple Quartz
Coil Atomizer
Pure Quartz
Chamber
5-Click ON/OFF
Power Button
Powerful
1100mAh Battery
MAKE
CLOUDS
LET’S
Question and Answer IconNeed help?

Do you have a question about the Pulsar APXV3 WAX and is the answer not in the manual?

Overview

The Pulsar® APX Wax V3 is a portable concentrate vaporizer designed for safe and efficient use. It features a full metal mouthpiece, a triple quartz coil atomizer with a pure quartz chamber, and a powerful 1100mAh battery.

Function Description:

The APX Wax V3 is used for vaporizing concentrates. Users load their preferred concentrate into the pure quartz cup chamber, which is then heated by triple quartz coils to produce vapor. The device is activated by a 5-click ON/OFF power button and offers a 2-click hands-free power mode for convenience. The LED display provides visual feedback on battery status and charging.

Important Technical Specifications:

  • Size: 32mm x 23mm x 94mm
  • Input: DC 5V/1.0A
  • Battery Capacity: 1100mAh Class A Lithium Battery
  • Atomizer Resistance: 0.7Ω
  • Battery Recharge Cycle Count: 300
  • Charging Time: Approximately 3 hours for the first full charge; 1.5 hours for subsequent recharges.
  • Continuous Power: Approximately 1.5 hours, depending on use.

Usage Features:

  • Activation: Turn the unit on/off by pressing the power button rapidly 5 times.
  • Loading: Concentrates can be loaded either before heating or after the coils have been warmed. Do not overfill; a 0.4 gram maximum product is suggested.
  • Heating: Press and hold the power button for manual heating, or use 2 rapid clicks for hands-free power mode. Inhale once the concentrate melts (around 5 seconds).
  • Battery Level Display:
    • Green APX Logo = 100-60% Power Level
    • Orange APX Logo = 60-20% Power Level
    • Red APX Logo = 20-0% Power Level
  • Low Battery Indicator: The APX Logo LED will flash alternating red & green 3 times, and the device will not power on.
  • Charging: Use a 5V/1.5 Amp USB AC wall adapter and the included USB-C charge cord. The APX Logo LED will flash red slowly until fully charged, then turn solid green. It is crucial to avoid letting the unit dangle from the cord during charging and never charge from an automobile or laptop power source. Never charge the device for more than 24 hours.
  • Pro Tips:
    • Fully charge the unit and heat the empty atomizer several times before first use to burn off manufacturing impurities.
    • To load, place concentrate directly on cool quartz coils, or gently pre-heat coils and then place concentrate on slightly warmed coils.
    • Observe vapor amount in the glass chamber to gauge desired cloud size.
    • Allow 5 seconds for the unit to reheat after coils have cooled.
    • ATTENTION: Do not touch the coils with metal dab tools while the power button is engaged.

Maintenance Features:

  • Mouthpiece Cleaning:
    1. Remove the metal mouthpiece by pulling it away from the vape body.
    2. Soak the mouthpiece in isopropyl alcohol for one hour.
    3. Remove, wipe with a cleaning wipe, rinse in cold water, and dry with a hand towel or paper towel.
  • Coil Chamber Cleaning:
    1. With the mouthpiece removed, hold the vape battery with the attached coil upside down and power the unit on to heat up and remove any residual product.
    2. Let the unit cool.
    3. Use an alcohol-filled cotton swab or lightly dip a dry cleaning swab in 91% isopropyl alcohol.
    4. Wipe the outside and rim of the coil chamber without touching the heating elements.
    5. Unthread and remove the coil from the vape body.
    6. Wipe the 510 threading of the vape body with a cleaning swab.
    7. Re-assemble the vaporizer.
  • Cleaning Notes:
    • Do not use cleaning solutions, solvents, or other chemicals, as this can result in undesirable tastes/smells and potential health hazards.
    • Regular cleaning after each use is recommended to prevent excessive build-up, which can affect taste, device function, and warranty status.

Important Safety Warnings:

  • Do not expose to extreme temperatures or direct sunlight.
  • Do not drop the device or accessories.
  • Do not drop or submerge in any liquid.
  • Do not modify the electronics in any way.
  • This device is intended for adults only; do not sell or provide to minors. Keep all parts, concentrates, herbs, and liquids away from children and pets.
  • This is not a medical device and is not intended to diagnose, treat, mitigate, cure, or prevent any ailment, disease, or other conditions. Consult a physician before use, especially if you suffer from heart disease or any other medical condition, or if you are pregnant or breastfeeding.
  • Failure to follow instructions and safety warnings may result in injury, property damage, and may void the warranty.

Pulsar APXV3 WAX Specifications

General IconGeneral
BrandPulsar
ModelAPXV3 WAX
CategoryVaporizers
LanguageEnglish

Related product manuals