Pulsar SiPPER - User Manual

VAPORIZER
Thank you for purchasing the Pulsar
®
Sipper!
Combining all the functionality of a hands-free
auto-lling glass with the timeless style of a lava
lamp, this Pulsar device is ready to take your
next session to the max! Whether you prefer
wax concentrates or 510 oil cartridges, the
Sipper provides cool hits just the way you like it.
In order to ensure safe use, please read all instructions
and safety warnings before operating.
Failure to follow instructions may result in injury and may
void your warranty.
KIT CONTENTS
1. Sipper base
2. Glass dry cup
3. Mouthpiece
4. Airow valve
5. Airow silicone
6. Atomizer/cartridge cover
7. Wax atomizer
8. 510 connection
9. Dab tool/poker
10. USB-C charging cable
FEATURES & SPECIFICATIONS
Auto lling • Glass dry cup • Triple quartz coil • USB-C charging
Size: 4.3"/10.9cm x 4.3"/10.9cm x 8.85"/22.5cm
Input: 4.4-6.0V 1A
Battery Capacity: 1500mAh
Atomizer Resistance: 1ohm
Voltages: Yellow - 2.5v Blue - 3v Green - 3.5v Red - 4.2v
10
9
6
7
8
5
DRY CUP
1
2
3
4
POWER BUTTON/
TOUCHPAD
CHARGING
PORT
DO NOT
ADD WATER
!

Summary

Pulsar Sipper Kit Contents

Included Components

Lists all items included in the Pulsar Sipper package, such as the base, dry cup, atomizer, and charging cable.

Pulsar Sipper Features and Specifications

Key Features

Highlights core functionalities like auto filling, dry cup usage, triple quartz coil, USB-C charging, and voltage settings.

Device Specifications

Details the physical dimensions, power input, battery capacity, and atomizer resistance of the device.

Pulsar Sipper Assembly and Loading

Assembly Instructions

Step-by-step guide on how to connect the atomizer, airflow valve, and dry cup to the Sipper base.

Loading Concentrate

Instructions for loading a small amount of concentrate into the atomizer before use.

Pulsar Sipper Usage Modes

Basic Operation and Voltage Control

How to power on/off, change voltage by pressing the touchpad, and activate vapor filling.

Auto Filling Mode

Instructions for starting and stopping the auto filling mode for continuous vapor production.

Pulsar Sipper Maintenance and Troubleshooting

Cleaning Guide

Detailed steps for disassembling and cleaning the device components using alcohol wipes.

Troubleshooting Common Issues

Guidance on resolving issues like dead coils, no connection, or low battery indicators.

Pulsar Sipper Safety Information

Important Safety Warnings

Crucial precautions regarding temperature, dropping, liquid submersion, modifications, and intended use.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The Pulsar® Sipper is a hands-free auto-filling vaporizer designed for both wax concentrates and 510 oil cartridges, combining the functionality of a modern device with the aesthetic of a lava lamp. It aims to provide cool hits and an enhanced vaping experience.

Function Description:

The Sipper operates by automatically filling a glass dry cup with vapor, allowing users to inhale through a mouthpiece once the cup is full. It supports both wax atomizers and 510 oil cartridges, offering versatility in consumption. The device features an auto-filling mode that can run continuously for up to one minute, or be stopped manually. This mode can also help clear minor clogs in cartridges or atomizers.

Important Technical Specifications:

• Size: 4.3" (10.9cm) x 4.3" (10.9cm) x 8.85" (22.5cm)
• Input: 4.4-6.0V 1A
• Battery Capacity: 1500mAh
• Atomizer Resistance: 1ohm
• Voltages:
  • Yellow: 2.5V
  • Blue: 3V
  • Green: 3.5V
  • Red: 4.2V
• Coil Type: Triple quartz coil (for wax atomizer)
• Charging: USB-C charging cable included.

Usage Features:

• Power On/Off: Press the touchpad 5 times with your finger. The light around the touchpad will flash to indicate it's on and show the battery life.
  • Green: 100% - 70%
  • Blue: 70% - 30%
  • Red: 30% - 0%
• Automatic Shut-off: The Sipper will automatically turn off after 10 minutes of inactivity.
• Operating Wax Atomizer:
  1. Ensure the Sipper is on.
  2. Press the touchpad 3 times to cycle through and select your desired voltage.
  3. Touch and hold the touchpad. The pump will activate, and vapor will begin to fill the dry cup.
  4. Once the dry cup is filled, remove it from the base and inhale through the mouthpiece.
• Operating 510 Cartridge:
  1. Remove the wax atomizer and unscrew the 510 connection.
  2. Insert a 0.5ml or 1ml 510 cartridge into the 510 connection, then screw the 510 connection back into the base.
  3. Replace the cover and place the dry cup back on top.
  4. Press the touchpad 5 times to turn on the Sipper.
  5. Press the touchpad 3 times to select your voltage.
  6. Press and hold the touchpad. The pump will activate, and vapor will fill the dry cup.
  7. Once the dry cup is filled, remove it from the base and inhale through the top.
  • Note: The Sipper is compatible with most, but not all, cartridges.
• Auto Mode:
  1. Press the touchpad 2 times to activate the auto-filling mode. The Sipper will run for 1 minute continuously.
  2. Press the touchpad 1 time to stop auto mode if the dry cup fills before the minute is up.
  • Pro Tip: This mode can help clear minor clogs. If a clog persists for more than 20 seconds, disable Auto Mode and use the included dab tool to manually clear it.
• Loading:
  1. Remove the dry cup from the cover, then remove the cover from the base.
  2. For wax concentrates, load a small amount (about half a grain of rice) into the connected wax atomizer. Do not overfill.
  3. Replace the cover and then the dry cup.
  • Attention: Do not touch the coils with metal dab tools while the Sipper is operating.
• Troubleshooting:
  • Dead Coil / No Connection: If the coil burns out or has a poor connection, the light will flash red 3 times. Try removing and reinstalling the wax atomizer. If the issue persists, replace with a new wax atomizer.
  • Low Battery Indicator: When the battery is below 5%, the light will flash red 8 times, and the Sipper will power off. Recharge using the USB-C charging cable until the touchpad light turns green.

Maintenance Features:

• Disassembly for Cleaning:
  1. Remove the airflow valve and separate its two pieces.
  2. Remove the atomizer/cartridge cover from the base.
  3. Remove the airflow silicone.
  4. Remove the atomizer or cartridge from the 510 connection.
  5. Unscrew the 510 connection from the base.
• Cleaning Glass (Dry Cup):
  • Wipe the inside of the dry cup with an alcohol wipe until all residue is removed.
  • Alternatively, submerge the entire dry cup in 91% alcohol or glass cleaner until the residue dissolves.
• Cleaning Silicone Parts, 510 Connection, Base:
  • Use an alcohol wipe or a cotton swab with 91% alcohol to clean off any buildup on all silicone parts and the 510 connection.
  • Use a cotton swab and 91% alcohol to clean any buildup beneath the 510 connection.
• Important Safety Warnings:
  • Do not expose to extreme temperatures or direct sunlight for prolonged periods.
  • Do not drop the Sipper or its accessories.
  • Do not drop or submerge the base in any liquid.
  • Do not modify the electronics in any way.
  • This device is intended for adults only. Do not sell or provide to minors.
  • Keep all parts, concentrates, herbs, and liquids away from children and pets.
  • This is not a medical device and is not intended to diagnose, treat, mitigate, cure, or prevent any ailment, disease, or other conditions. Consult a physician before use, especially if you suffer from heart disease or any other medical condition, or if you are pregnant or breastfeeding.
  • Failure to follow instructions may result in product damage, property damage, personal injury, and may void warranty.
  • DO NOT ADD WATER.

Pulsar SiPPER Specifications