Pulsar Axion 2 XG35 User Manual

External Power Supply
Show device diagram
External power can be supplied from an external source, such as a Power
Bank (5 V, 9 V).
1.
Connect the external power source to the USB Type-C connector (9) on
the device.
2.
The device will switch to draw power from the external source while the
АPS5 battery is gradually recharged.
3.
A battery icon will appear on the display showing the percentage-
charged level.
4.
An icon will be displayed when the device is powered by an

Pulsar Axion 2 XG35 Specifications

General

Thermal Sensitivity	<40 mK
Frame Rate	50 Hz
Objective Lens	F35/1.0
Sensor Type	Uncooled Microbolometer
Display Type	AMOLED
Built-in Memory	16 GB
Wi-Fi Channel	2.4 GHz
Protection Degree	IPX7
Operating Temperature Range	-25°C to +50°C
Power Supply	3.0 - 4.2 V
Battery Capacity	4900 mAh
Magnification	2x - 8x
Detection Range	1750 meters
Display Resolution	1024x768 pixels
Video / Photo Resolution	1024x768
Video / Photo Format	MP4 / JPG
Battery Type	Li-Ion
Sensor Resolution	384x288 pixels