Pulsar Axion 2 XG35 User Manual

Brightness – press the UP (5)/DOWN (3) buttons to change display
brightness from 0 to 20.
Contrast – press the UP (5)/DOWN (3) buttons to change image
contrast from 0 to 20.
Note:display brightness and contrast settings are saved in the memory
when the device is turned off.
Stadiometric Rangefinder - change the position of special marker
lines to determine the distance to the object being observed by pressing the
UP (5)/DOWN (3) buttons (for more details see the Stadiametric
Rangefindersection).
Smooth Digital Zoom – press the UP (5)/DOWN (3) button to change
the value of the digital zoom from 2 to 8. The digital zoom changes in 0.1
increments.
Press and hold the MENU (4) button to exit the menu or wait for 10
seconds to exit automatically.

Pulsar Axion 2 XG35 Specifications

General

Thermal Sensitivity	<40 mK
Frame Rate	50 Hz
Objective Lens	F35/1.0
Sensor Type	Uncooled Microbolometer
Display Type	AMOLED
Built-in Memory	16 GB
Wi-Fi Channel	2.4 GHz
Protection Degree	IPX7
Operating Temperature Range	-25°C to +50°C
Power Supply	3.0 - 4.2 V
Battery Capacity	4900 mAh
Magnification	2x - 8x
Detection Range	1750 meters
Display Resolution	1024x768 pixels
Video / Photo Resolution	1024x768
Video / Photo Format	MP4 / JPG
Battery Type	Li-Ion
Sensor Resolution	384x288 pixels