Pulsar Axion 2 XG35 User Manual

Video mode. Video recording
1. Switch to Video mode by pressing and holding the DOWN/REC (3)
button.
2. The icon and the remaining recording time in HH:MM
(Hours:Minutes) format are displayed in the upper left corner, for example
4:20.
3. Press the DOWN/REC (3) button briefly to start video recording.
4. When the video recording starts, the icon will disappear and the
REC icon and timer in MM:SS (Minutes:Seconds) format will appear .
5. Pause and resume recording video with a short press of the DOWN/REC
(3) button.
6. Stop recording video with a long press of the DOWN/REC (3)button.
7. Video files are saved to the built-in memory card after the video
recording has been stopped.
8. Press and hold theDOWN/REC (3) button to switch between the Video
and Photomodes (Video-> Photo-> Video…).

Pulsar Axion 2 XG35 Specifications

General

Thermal Sensitivity	<40 mK
Frame Rate	50 Hz
Objective Lens	F35/1.0
Sensor Type	Uncooled Microbolometer
Display Type	AMOLED
Built-in Memory	16 GB
Wi-Fi Channel	2.4 GHz
Protection Degree	IPX7
Operating Temperature Range	-25°C to +50°C
Power Supply	3.0 - 4.2 V
Battery Capacity	4900 mAh
Magnification	2x - 8x
Detection Range	1750 meters
Display Resolution	1024x768 pixels
Video / Photo Resolution	1024x768
Video / Photo Format	MP4 / JPG
Battery Type	Li-Ion
Sensor Resolution	384x288 pixels