Pulsar Axion 2 XG35 User Manual

To turn on and off the PiP function see the PiP Mode section.
Press and hold the UP (5) button to change the magnification ratio in
the PiPwindow.
The zoomed image is displayed in a dedicated window, while the image
in the rest of the screen is displayed at base magnification (2x).
When the PiP is turned on you can control both the discrete and smooth
digital zoom. In this case the zoom value changes only take place in the
dedicated window.
When the PiP function is turned off, the screen will display at the
magnification that was set in PiPmode.

Pulsar Axion 2 XG35 Specifications

General

Thermal Sensitivity	<40 mK
Frame Rate	50 Hz
Objective Lens	F35/1.0
Sensor Type	Uncooled Microbolometer
Display Type	AMOLED
Built-in Memory	16 GB
Wi-Fi Channel	2.4 GHz
Protection Degree	IPX7
Operating Temperature Range	-25°C to +50°C
Power Supply	3.0 - 4.2 V
Battery Capacity	4900 mAh
Magnification	2x - 8x
Detection Range	1750 meters
Display Resolution	1024x768 pixels
Video / Photo Resolution	1024x768
Video / Photo Format	MP4 / JPG
Battery Type	Li-Ion
Sensor Resolution	384x288 pixels