Pulsar Axion 2 XQ35 - Page 13


1.
Insert the APS 5 battery (13) along the guide into the APS 5 charger*
(15) slot as far as it will go.
2.
Connect the plug of the USB Type-C cable (17) to the USB Type-C
connector of the Power Adapter(18).
3.
Plug the Power Adapter (18) into a 100-240 V socket.
4.
Connect the other end of the USB Type-C cable (17) to the USB Type-C
connector (15)of the charger.
5.
LED indicators (16) will display the battery charge level (see Table).