EasyManua.ls Logo

Pulsar Axion 2 XQ35 - Video Mode Operations

Pulsar Axion 2 XQ35
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Video mode. Video recording
1. Switch to Video mode by pressing and holding the DOWN/REC (3)
button.
2. The icon and the remaining recording time in HH:MM
(Hours:Minutes) format are displayed in the upper left corner, for example
4:20.
3. Press the DOWN/REC (3) button briefly to start video recording.
4. When the video recording starts, the icon will disappear and the
REC icon and timer in MM:SS (Minutes:Seconds) format will appear .
5. Pause and resume recording video with a short press of the DOWN/REC
(3) button.
6. Stop recording video with a long press of the DOWN/REC (3)button.
7. Video files are saved to the built-in memory card after the video
recording has been stopped.
8. Press and hold theDOWN/REC (3) button to switch between the Video
and Photomodes (Video-> Photo-> Video…).

Related product manuals