1.
Install the battery (10) into its slot on the device case (14) by aligning the icons
to form a ‘dot’ on the unit and the battery.
2.
Attach a USB cable (15)to the microUSB connector (8) on the device.
3.
Connect the other end of the USB cable (15) to the power adapter (16) or to a USB
socket connected to another power sources with rated output of 5V or less.
4.
Connect the power adapter (16) to the mains power supply (17).
5.
Wait until the battery is fully charged (indication in the status bar: )
Note: The PB8I Power Bank may be used as a charger.
Option 2
To Next Page
Loading...
