Need help?Do you have a question about the Pulsar HELION 2 XP50 PRO and is the answer not in the manual?
Highlights key features and capabilities of the Helion 2 PRO thermal imaging scopes.
Covers information regarding the device's battery pack, including its use and charging.
Instructions on how to charge and install the rechargeable Li-Ion Battery Pack IPS7.
Guide to turning on the device and adjusting the image for optimal viewing.
Explains the three calibration modes (Manual, Semi-Automatic, Automatic) for image quality.
Provides solutions for common malfunctions, possible causes, and corrective actions.
Highlights key features and capabilities of the Helion 2 PRO thermal imaging scopes.
Covers information regarding the device's battery pack, including its use and charging.
Instructions on how to charge and install the rechargeable Li-Ion Battery Pack IPS7.
Guide to turning on the device and adjusting the image for optimal viewing.
Explains the three calibration modes (Manual, Semi-Automatic, Automatic) for image quality.
Provides solutions for common malfunctions, possible causes, and corrective actions.
General| Sensor Resolution | 640x480 pixels |
|---|---|
| Objective Lens | F50/1.2 |
| Magnification | 2.5-20x |
| Detection Range | 1800 m |
| Display Type | AMOLED |
| Display Resolution | 1024x768 pixels |
| Battery Life | Up to 8 hours |
| Dimensions | 234x55x58 mm |
| Digital Zoom | 8x |
| Sensor Type | Uncooled Microbolometer |
| Frame Rate | 50 Hz |
| Built-in Memory | 16 GB |
| Wi-Fi Channel | 2.4 GHz |
| Waterproof Level | IPX7 |
| Field of View | 12.4° |
| Video / Photo Format | MP4 / JPEG |
| Operating Temperature | -25°C to +50°C |
| External Power Supply | 5V |
| Battery Type | IPS7 Li-Ion Battery Pack |
To Next Page
