Need help?Do you have a question about the Pulsar Axion 2 LRF XG35 and is the answer not in the manual?
General| Objective Lens Diameter | 35 mm |
|---|---|
| Detection Range | 1800 m |
| Refresh Rate | 50 Hz |
| Built-in memory | 16 GB |
| Wi-Fi | Yes |
| Frequency | 50 Hz |
| Protection degree | IPX7 |
| Battery type | Li-Ion |
| Operating time on battery pack | 8 hours |
| Laser rangefinder | Yes |
| Wavelength | 905 nm |
| Accuracy | ± 1 m |
| Sensor | 640x480 px, 12 µm |
| Display | AMOLED, 1024x768 |
| Video / Photo resolution | 1024x768 px |
| Video / Photo format | MP4 / JPG |
| Operating temperature | -25 … +50 °C |
| Objective lens | F35 |
| Magnification | 2.5x - 10x |
| Field of View | 12.4° |
Instructions on how to charge the device's APS 5 rechargeable Lithium-ion battery.
Step-by-step guide for inserting and removing the APS 5 battery pack.
Important safety warnings and guidelines for handling and charging batteries.
Initial setup steps including powering on the device and adjusting image focus.
Explanation of button functions, short presses, and long presses for device control.
Adjusting sensitivity enhancement levels (Normal, High, Ultra) for image quality.
Operation of the integrated laser distance measurement tool in single and scan modes.
Solutions for common issues such as device not turning on or image quality problems.
To Next Page