Need help?Do you have a question about the Pulsar AXION LRF XQ38 and is the answer not in the manual?
Describes how to perform a single distance measurement using the laser rangefinder.
Explains how to activate and use the scan mode for continuous distance measurement.
Describes how to perform a single distance measurement using the laser rangefinder.
Explains how to activate and use the scan mode for continuous distance measurement.
General| Objective Lens Diameter | 38 mm |
|---|---|
| Laser Rangefinder | Yes |
| Laser rangefinder wavelength | 905 nm |
| Laser rangefinder accuracy | ±1 m |
| Display type | AMOLED |
| Display Resolution | 1024 x 768 |
| Built-in memory | 16 GB |
| Wi-Fi channel | 2.4 GHz |
| Battery type | Li-ion |
| Protection degree, IP code | IPX7 |
| Eye Relief | 15 mm |
| Refresh Rate | 50 Hz |
| Spectral Range | 8 - 14 µm |
| NETD | <40 mK |
| IP Rating | IPX7 |
| Magnification | 3.5-14x |
| Laser rangefinder measuring range | 1000 m |
| Battery Life | 8 h |
| Sensor type | Uncooled microbolometer |
| Video / Photo resolution | 1024x768 |
| Video / Photo format | MP4 |
| Battery pack capacity | 4900 mAh |
| Battery capacity | 2600 mAh |
| External power supply | 5V |
| Operating temperature | -25°C to +50°C |
| Diopter Adjustment | -5 / +5 D |
| Digital Zoom | 4x |
| Storage Temperature | -40°C to +60°C |
| Sensor | 384x288 |
To Next Page
