Pulsar HELION 2 XP50 PRO User Manual

3
THERMAL IMAGING SCOPE HELION 2 XP50 PRO
ENGLISH
TECHNICAL SPECIFICATIONS
Model HELION 2 XP50 PRO
SKU 77431
Microbolometer
Type uncooled
Resolution, Pixels 640х480
Pixel Pitch, μm 17
NETD, mK < 25
Frame Rate, Hz 50
Optical Characteristics
Optical Magnication, x 2.5
Smooth Digital Zoom, x 2.5-20
Digital Zoom x2/x4/x8
Objective Lens F50 mm, F/1.0
Field of View (Horizontal), °/ m@100 m 12.4 / 21.8
Eyepiece Focus Range, Diopter ±5
Range of Detection, m/y (Deer Type Object) 1800 / 1968.5
Display
Type AMOLED
Resolution, Pixels 1024х768
Operational Characteristics
Power Supply, V 3 – 4.2 V
Battery Type Li-Ion Battery Pack IPS7
Capacity 6400 mAh
Nominal Output Voltage DC 3.7 V
External Power Supply 5 V (USB)
Battery Run Time at t=22°C, hours* 8
Level of Protection (acc. to IEC 60529), with Battery Installed IPX7
Operating Temperature -25 °C …+50 °C
Dimensions, mm/inch 242х75х60 / 9.53x2.96x2.36
Weight (without battery), kg 0.5
Video Recorder
Video / Photo Resolution, Pixels 1024x768
Video / Photo Format .mp4 / .jpg
Built-In Memory 16 GB
Built-In Memory Capacity About 5 h video or > 100,000 pictures
Wi-Fi Channel
Frequency 2.4 GHz
Standard 802.11 b / g
Line-of-Sight Reception Range, m ** up to 15
*Actual operating time will depend to what extent the Wi-Fi and built-in video recorder is used.
**The reception range may vary depending on various factors: obstacles, other Wi-Fi networks.
This product is subject to change in line with improvements to its design.
PACKAGE CONTENTS
•
Helion 2 Pro thermal imaging scope
•
Hand strap
•
IPS7 Battery Pack
• Quick start guide
•
Battery charger with mains charger
• Lens cloth
•
USB cable
• Warranty card
•
Carrying case
DESCRIPTION
Helion 2 Pro thermal imaging scopes are based on an IR sensor (uncooled microbolometer). The scopes are
designed for the use both in the night-time and during the day in adverse weather conditions (fog, smog, rain)
to see through obstacles hindering detection of targets (branches, tallgrass, thick bushes, etc.).
Helion 2 Pro thermal imaging scopes do not require an external source of light and are not affected by bright
light exposure.
Helion 2 Pro thermal imaging scopes are designed for various applications including hunting, observation,
security, terrain orientation, search and rescue operations, etc.
DISTINCTIVE FEATURES
•
NETD less than 25 mK
•
User-friendly interface
•
Four operating modes: Forest, Rocks, Identication, User
•
Three calibration modes: (Manual, Semi-Automatic, Automatic)
•
Eight colour palettes for observation
•
Defective pixel repair function
•
Image Detail Boost function
•
Stadiametric rangender
•
Display Off function
•
Functional and ergonomic design
•
All-metal body made of light-alloy metal
•
Updatable rmware
•
Wide operating temperature range (-25 to +50°C)
VIDEO/AUDIO RECORDING
•
Built-in video and sound recorder
•
Integration with macOS and Android devices
•
Direct YouTube streaming and recording to the Internet using the Stream Vision application
•
Wi-Fi remote control and viewing using a smartphone
BATTERY PACK
•
Quick release Li-Ion Battery Packs IPS7 / IPS14
•
Operating time in Wi-Fi mode up to 16 hours*
•
Operates on AA batteries**
•
USB charging capability for IPS7 / IPS14
* with IPS14 Battery Pack (purchased separately).
** with a special battery container (purchased separately).

Pulsar HELION 2 XP50 PRO Specifications

General

Sensor Resolution	640x480 pixels
Objective Lens	F50/1.2
Magnification	2.5-20x
Detection Range	1800 m
Display Type	AMOLED
Display Resolution	1024x768 pixels
Battery Life	Up to 8 hours
Dimensions	234x55x58 mm
Digital Zoom	8x
Sensor Type	Uncooled Microbolometer
Frame Rate	50 Hz
Built-in Memory	16 GB
Wi-Fi Channel	2.4 GHz
Waterproof Level	IPX7
Field of View	12.4°
Video / Photo Format	MP4 / JPEG
Operating Temperature	-25°C to +50°C
External Power Supply	5V
Battery Type	IPS7 Li-Ion Battery Pack