Need help?Do you have a question about the Pulsar KRYPTON FXG50 and is the answer not in the manual?
General| Objective lens | 50 mm |
|---|---|
| Display type | AMOLED |
| Display resolution | 1746x1000 pixels |
| Frame rate | 50 Hz |
| Power supply | 3.0 - 4.2V |
| Video / Photo format | .mp4 / .jpg |
| Built-in memory | 16 GB |
| Protection degree, IP code | IPX7 |
| Objective lens diameter | 50 mm |
| Eye relief | 15 mm |
| Focus range | 5 m to infinity |
| Detection range | 2300 m |
| Field of view | 8.7° x 6.5° |
| Operating temperature | -25 … +50 °C |
| Diopter adjustment | -5 to +5 |
| Battery type | Battery pack IPS7 / IPS14 |
| Battery life | 8 hours |
Details the sensor technology and its specifications.
Specifies magnification, field of view, and lens parameters.
Outlines the display type and resolution.
Covers power supply, battery, and operating temperature.
Lists video resolution and format details.
Identifies and lists all physical parts of the device.
Explains the operation of each button in different modes.
Provides step-by-step instructions for charging the battery.
Details how to connect and use an external power source.
Guides the process of attaching the module to an optical device.
Explains how to attach the monocular accessory.
Explains calibration modes for image equalization and defect elimination.
Details observation modes and user settings within the main menu.
Resets various device settings to factory defaults.
Guides the process of formatting the internal memory card.
Details the process for identifying and removing defective pixels.
Describes the icons and information displayed on the status bar.
Explains how to record videos and take photos using the device.
Explains using the device as power source or memory card via USB.
Lists common problems like device not turning on and their solutions.
To Next Page
