Name: Pulsar Axion XM30F
Brand: Pulsar
Rating: 4 (1 reviews)

To Next Page

To Previous Page

External power is supplied from an external source, such as a 5V Power Bank.

Attach the external power source to the device's USB connector (8).

The device will switch to operation from the external power source, while the APS3

battery will be gradually recharged.

An icon of a battery will appear on the display showing its charge as a

percentage.

If the device is operated from an external power source and the APS3 battery is

not connected, an icon is displayed.

When the external power supply is disconnected, the device switches to the

internal power supply without the device powering off.

Important!Power Bank must be connected to the device with the battery installed.

Attention! Charging Power Bank APS3 batteries at air temperatures below 0 °C can

Questions and Answers:

Need help?

Do you have a question about the Pulsar Axion XM30F and is the answer not in the manual?

Pulsar Axion XM30F Specifications

General