EasyManuals Logo

Pulsar Merger LRF XP50 User Manual

Pulsar Merger LRF XP50
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
3.
The display will show the battery icon with charge level as a
percentage.
4.
If the device is powered by an external power supply, but the APS3
battery is not connected, only the built-in battery will be charged.
5.
When the external power supply is disconnected, the device switches
to the internal battery pack without powering off.
Warning!Charging the built-in battery and the APS3 battery from the
power bank at an external temperature below 0 °C (32 °F) can reduce the
battery life. When using external power, connect the Power Bank to the
device after it has been turned on and working for several minutes.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pulsar Merger LRF XP50 and is the answer not in the manual?

Pulsar Merger LRF XP50 Specifications

General IconGeneral
Objective Lens Diameter50 mm
Detection Range1800 m
Laser RangefinderYes
Wavelength905 nm
Built-in Memory16 GB
Wi-FiYes
Stream Vision 2Yes
Waterproof LevelIPX7
Display Resolution1024x768
Video / Photo FormatMP4, JPG
External Power SupplyUSB-C
Operating Temperature Range-25 … +50 °C

Related product manuals