Pulsar Merger LRF XP50 User Manual

Turn on/off the PiP function with a long press of UP/ZOOM (7) button.
Change zoom ratio in the PiP window with a short press of UP/ZOOM (7)
button.
The zoomed image is displayed in a dedicated window, while the image
in the rest of the screen is displayed at base magnification (2.5x).
When PiP is turned on, you can operate the discrete and continuous
digital zoom. The magnification will take place only in the dedicated
window.
When PiP is turned off, the image is shown with the optical
magnification set for the PiP function.

Pulsar Merger LRF XP50 Specifications

General

Objective Lens Diameter	50 mm
Detection Range	1800 m
Laser Rangefinder	Yes
Wavelength	905 nm
Built-in Memory	16 GB
Wi-Fi	Yes
Stream Vision 2	Yes
Waterproof Level	IPX7
Display Resolution	1024x768
Video / Photo Format	MP4, JPG
External Power Supply	USB-C
Operating Temperature Range	-25 … +50 °C