Pulsar Merger LRF XP50 User Manual

Technical Maintenance
Maintenance should be carried out no less frequently than twice a year, and
should consist of the following measures:
Wipe the exterior surfaces of metal and plastic parts off dust and dirt
with a cotton cloth. To avoid damage to the paint coating, do not use
chemically active substances, solvents, etc.
Clean the electric terminals of the Battery Pack and device's battery slot
using a grease-free organic solvent.
Check the lenses of the eyepiece, objective and rangefinder. If required,
remove dust and sand (preferably by a noncontact method). Clean the
external surfaces of the lenses with products expressly designed for this
purpose.

Pulsar Merger LRF XP50 Specifications

General

Objective Lens Diameter	50 mm
Detection Range	1800 m
Laser Rangefinder	Yes
Wavelength	905 nm
Built-in Memory	16 GB
Wi-Fi	Yes
Stream Vision 2	Yes
Waterproof Level	IPX7
Display Resolution	1024x768
Video / Photo Format	MP4, JPG
External Power Supply	USB-C
Operating Temperature Range	-25 … +50 °C