Pulsar PEW1800 User Manual

Low Pressure Setting
11
Dispensing Detergent
The built-in detergent dispenser will allow you to apply many forms of liquid detergent
onto the work surface. Detergent application happens at low-pressure only. Insert the
adjustable nozzle onto the gun, and turn it to end of “ - ” so that the pressure washer
is in low-pressure mode (see Figure A below). Remove the cap on the detergent
reservoir and fill with liquid detergent only (see Figure B below). Do not put any water
into the reservoir. The pressure washer will mix water and detergent automatically.
When finished applying the detergent to the work surface, turn it to end of “ + ” of
the adjustable nozzle and spray off the detergent by using the high-pressure spray
(see Figure A below). In high-pressure mode, the pressure washer will not dispense
detergent.
FIGURE A
High Pressure Setting
1800 PSI Pressure Washer
FIGURE B
Diagram 2
Diagram 1

Pulsar PEW1800 Specifications

General

Brand	Pulsar
Model	PEW1800
Category	Pressure Washer
Language	English