To Next PageTo Next PageWhat to do if my Pulsar PWE1600 Pressure Washer will not start?
If your Pulsar Pressure Washer isn't starting, begin by verifying the power cord is securely plugged in. Then, check the plug, socket, and fuses to ensure they are functioning correctly. Inadequate voltage could also be the cause, so confirm that the voltage supply is sufficient. Lastly, if the GFCI trips, try resetting it or using another outlet.
Why does the pump on my Pulsar PWE1600 not reach adequate pressure?
If your Pulsar Pressure Washer pump isn't reaching adequate pressure, or if it fluctuates, there are several potential causes. First, check the water intake filter and clean it if clogged. Also, inspect the hose for any kinks or leaks that may be restricting the water supply. Fully open the water source to ensure sufficient water supply. Tighten connections and bleed the system if the pump is drawing air. If the diameter of the garden hose is too small, replace it with a 1-inch garden hose. Finally, clean or replace the suction valves if they are clogged or worn.
Why does the motor on my Pulsar Pressure Washer stop running?
If your Pulsar Pressure Washer motor stops running while in use, the net voltage may be lower than suggested. Check to determine the voltage is adequate.
How to fix a Pulsar PWE1600 Pressure Washer that won't maintain pressure?
If your Pulsar Pressure Washer has or will not maintain pressure, it might be due to excessive air in the waterline and pump. To resolve this, turn off the unit and water supply, and then bleed the lines.
Why is my Pulsar PWE1600 Pressure Washer making excessive noise?
If your Pulsar Pressure Washer is making excessive noise, consider these potential issues: * Check the intake valves as the intake might be blocked. * Check, clean, or replace the valves if they are worn, dirty, or clogged. * Check, clean, or replace the water intake filter if it is dirty.
General| Brand | Pulsar |
|---|---|
| Model | PWE1600 |
| Category | Pressure Washer |
| Language | English |
Explains the GFCI protection integrated into the power cord for shock prevention.
Covers essential safety rules, precautions, and general guidelines for safe operation.
Step-by-step guide for unpacking and assembling the pressure washer components.
Comprehensive guide on starting, operating, and stopping the pressure washer.
Covers starting, auto on/off, bleeding, safety lock, and spray nozzle usage.
Details on detergent nozzle, pressure adjustment, auto-stop, and using detergents.
Steps for safely shutting down, winterizing, and maintaining the pressure washer.
Specific advice for cleaning decks, patios, vehicles, and equipment.
Solutions for problems like starting failures, pressure issues, noise, and motor stops.
Details the warranty coverage, terms, and conditions for the pressure washer.
A diagram showing the pressure washer's components with numbered parts.
Specifications and guidance on environmentally safe disposal of the machine.
A comprehensive list of all parts with their corresponding part numbers.
