Pulsar PG5250B Owner's Manual

Operation
14
Connecting to LPG Fuel Source
1.Locate the LPG converter on the front of the generator.
2.Attach small end of the Gas Hose to the LPG converter.
3.Connect gas hose to propane fuel source. Do not turn on
propane source prior to following the steps outlined.
Starting the Generator Set
Ground Terminal
Before using generator, a ground wire must be connected to the ground terminal. The Ground
terminal is located on the Front Panel. Before using the ground terminal consult a qualified
electrician.
Ground Terminal Symbol:
The 5250Watt dual fuel generator can be started using the following method. Recoil Start
Method.
ｉｆ＠ｕｓｉｎｇ＠ｐｒｏｐａｎｅ＠ｆｕｅｌ＠ｓｏｕｒｃｅ
ＱＮｃｯｮｮ･｣ｴ＠ｴｨ･＠ｧ｡ｳ＠ｰｩｰ･＠ｴｯ＠ｴｨ･＠ｩｮｴ｡ｫ･＠ｮｯｺｺｬ･＠ｯｦ＠ｲ･ｧｵｬ｡ｴｯｲ［＠
ＲＮ＠ｏｰ･ｮ＠ｴｨ･＠ｶ｡ｬｶ･＠ｯｦ＠ｌｐｇ＠｢ｯｴｴｬ･［＠
ＳＮｔｵｲｮ＠ｴｨ･＠ｦｵ･ｬ＠ｳ･ｬ･｣ｴｯｲ＠ｴｯ＠ﾓｌｐｇﾔ＠ｰｯｳｩｴｩｯｮ［＠
ＴＮ＠ｐｵｳｨ＠ｴｨ･＠･ｮｧｩｮ･＠ｳｷｩｴ｣ｨ＠ｴｯ＠ﾓｏｎﾔ＠ｰｯｳｩｴｩｯｮ［＠
ＵＮ＠ｃｬｯｳ･＠ｴｨ･＠｣ｨｯｫ･Ｎ
ＶＮｃｯｮｴｩｮｵ･＠ｴｯ＠､･ｳｩｲ･､＠ｳｴ｡ｲｴＭｵｰ＠ｭ･ｴｨｯ､Ｎ
ｉｆ＠ｕｓｉｎｇ＠ｐｒｏｐａｎｅ＠ｆｕｅｌ＠ｓｏｕｒｃｅ
ＱＮ
ＲＮ
ＳＮ
ＴＮ＠
ＵＮ＠
ＶＮ

Pulsar PG5250B Specifications

General

Brand	Pulsar
Model	PG5250B
Category	Inverter
Language	English