Pulsar PG5250B Owner's Manual

24
Troubleshooting
Note:
Troubleshooting problems may have similar causes and solutions.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The engine
will not start
Is there fuel in the tank?
Refill the fuel tank.
Is there enough oil in the
engine?
Add the recommended oil.
Is the spark plug in good
condition?
Readjust gap and dry the spark plug.
Replace it if necessary.
Is the fuel reaching the
carburetor?
Clean the fuel sediment cup.
outlets
Is the AC circuit breaker ON?
Turn the AC circuit breaker ON.
Check the electrical appliance
or equipment for any defects.
·
Replace the electrical appliance
or
equipment.
·
Take the
electrical
appliance or equipment to an
electrical shop for repair.
No electricity
at the AC
If the engine still does not start, take the genera tor to an authorized agent generator dealer.
When using GAS to start the
generator. Checking the
battery voltage is normal or
not and be properly connected
to the generator.
If voltage is abnormal, replace
the battery with normal voltage.

Pulsar PG5250B Specifications

General

Brand	Pulsar
Model	PG5250B
Category	Inverter
Language	English