PULSAR 1.3
8
5 Technical Specifi cations
Model PL 110 FA PL 112 FA PL 115 FA PL 118 Sub A
Max. SPL @ 10% THD 128 dB half space 129 dB half space 129 dB half space 127 dB half space
Max. SPL peak @ 10% THD 134 dB half space 135 dB half space 135 dB half space 130 dB half space
Max. SPL calculated 136 dB half space 137 dB half space 137 dB half space 131 dB half space
Frequency response +/- 3 dB 70 Hz - 16 kHz 70 Hz - 16 kHz 58 Hz - 16 kHz 44 Hz - X-Over
Frequency response -10 dB 58 Hz - 18 kHz 56 Hz - 18 kHz 49 Hz - 18 kHz 35 Hz - X-Over
Output power 1000 watts 1000 watts 1000 watts 600 watts
Amp to woofer 650 W @ 4 ohms 650 W @ 4 ohms 650 W @ 4 ohms 600 W @ 4 ohms
Amp to driver 350 W @ 4 ohms 350 W @ 4 ohms 350 W @ 4 ohms -
Preamp DSP (time alignment) DSP (time alignment) DSP (time alignment) Analog
Amp type Class D - biamped Class D - biamped Class D - biamped Class D
Active protective circuits Under-voltage, thermal, short
circuit, over-current protection,
subsonic filter, look ahead tem-
perature control, peak, RMS and
multiband limiters
Under-voltage, thermal, short
circuit, over-current protection,
subsonic filter, look ahead tem-
perature control, peak, RMS and
multiband limiters
Under-voltage, thermal, short
circuit, over-current protection,
subsonic filter, look ahead
temperature control, peak, RMS
and multiband limiters
Under-voltage, thermal, short cir-
cuit, and over-current protection,
look ahead temperature control,
peak limiter
Bass woofer 10" featuring Advanced Cooling
Technology
12" featuring Advanced Cooling
Technology
15" featuring Advanced Cooling
Technology
18" featuring Advanced Cooling
Technology
HF driver 1" 1" 1" -
Horn directivity 90° x 55° CD horn 90° x 55° CD horn 90° x 55° CD horn -
Active x-over frequency 2.5 kHz, 24 dB / octave 2.5 kHz, 24 dB / octave 2.5 kHz, 24 dB / octave 100 Hz / 120 Hz variable
with 24 dB / octave
Audio ports 2x XLR Combo In, 1x Stereo RCA
In, 2 x XLR Thru, 1x XLR Mix Out
2x XLR Combo In, 1x Stereo RCA
In, 2 x XLR Thru, 1x XLR Mix Out
2x XLR Combo In, 1x Stereo RCA
In, 2x XLR Thru, 1x XLR Mix Out
2x XLR Combo In, 2x XLR Thru, 2x
XLR Mid/High Out
Input sensitivity +4 dBu @ Gain center-notched +4 dBu @ Gain center-notched +4 dBu @ Gain center-notched +4 dBu @ Gain center-notched
Filter presets 2 EQ switches: Stand Alone /
System & Flat / Contour
2 EQ switches: Stand Alone /
System & Flat / Contour
2 EQ switches: Stand Alone /
System & Flat / Contour
-
Mains connector 1x IEC socket with V-Lock cord
retainer
1x IEC socket with V-Lock cord
retainer
1x IEC socket with V-Lock cord
retainer
1x IEC socket with V-Lock cord
retainer
Power consumption 3 A / 220-240 V (6 A / 100-120V)
nominal according to EN 60065
3 A / 220-240 V (6 A / 100-120V)
nominal according to EN 60065
3 A / 220-240 V (6 A / 100-
120V) nominal according to EN
60065
3 A / 220-240 V (6 A / 100-120V)
nominal according to EN 60065
Pole mount DuoTilt 3/7 DuoTilt 3/7 DuoTilt 3/7 M20
Suspension points 5x M8 5x M8 5x M8 -
Grips 1, integrated 2, integrated 2, integrated 4, integrated
Housing Hybrid (MDF, particle) Hybrid (MDF, particle) Hybrid (MDF, particle) Hybrid (MDF, particle)
Front grille 1 mm metal grille backed with
black acoustic foam
1 mm metal grille backed with
black acoustic foam
1 mm metal grille backed with
black acoustic foam
1 mm metal grille backed with
black acoustic foam
Finish Black acrylic enamel Black acrylic enamel Black acrylic enamel Black acrylic enamel
Casters - - - Optional 100 mm
Optional accessories Cover, Tilt Unit, Rigging Yoke Cover, Tilt Unit, Rigging Yoke Cover, Tilt Unit, Rigging Yoke Cover, Mounting hardware for
casters, Tilt Unit
Dimensions (WxHxD) 35 x 49 x 37 cm
13-25/32 x 19-9/32 x 14-9/16"
38 x 66 x 37 cm
14-31/32 x 25-63/64 x 14-9/16"
46,5 x 69 x 45,2 cm
18-3/8 x 27-5/32 x 17-51/64"
52,5 x 69 x 69,1 cm
20-45/64 x 27-5/32 x 27-13/64"
Weight 16 kg / 35,3 lbs. 19,7 kg / 43.4 lbs. 25,7 kg / 56.7 lbs 40,5 kg / 89.3 lbs
To Next Page
Loading...