Do not turn the lawn mower over, or fuel
and oil will leak, causing a hazardous
condition and possible malfunction of the
lawn mower
Figure1 7
7. Install new blade with all mounting hardware; tighten
blade bolt by turning clockwise.
8.
up toward the mower deck.
40-50
30-38
Correct blade hub bolt torque is very
important. Use proper tools only!
7
4. Always add fuel atabilizer to the fuel as directed by
the
fuel stabilizer manufacturer.
Remove spark plug and spray a light fog of penetrating
oil, such as WD-40 into the spark plug hole; Then pull
the starter rope……..
Leave spark plug cable disconnected.
WARNING
WARNING
WARNING
To Next Page
Loading...
