English
13
Getting Started
y (6) should be charged
according to the diagram in the figure.
y Insert the rechargeable battery (6) along the guide into the
battery compartment (5).
y Open the lens cover (1).
y Press the ON/OFF (9) button briefly to turn on the device.
y (13) until the symbols in
the display are sharp.
y Rotate the lens focus ring (3)
observed.
y
(4).
y Enter the main menu with a long press of the MENU (11)
y (9)
y (11)
of the manual).
y
in the main menu to
improve the image as the amplification level increases.
y Select one of the colour palettes in the main menu (for
Modes section of the full version of the manual).
y Press the DOWN/LRF (12) button briefly to turn on the
rangefinder. The rangefinder reticle will appear in the
center of the display. Briefly press the DOWN/LRF (12)
button to measure the distance. Press and hold down
the DOWN/LRF (12) button for 2 seconds to measure the
distance in scan mode. If the rangefinder is idle longer than
y Upon completion of use turn the device off by a long press
of the ON/OFF (9) button.
Observation conditions:
will help to achieve the desired quality in a particular situation.
To Next Page
Loading...
