Pulsar TELOS - Page 32

Colour palette selection .
White Hot  is the default display mode .
To select an alternative palette , do the following :
 Press and hold the  MENU 11  button to enter the main menu .
 Use the  UP 10/ DOWN 12  buttons to select  Colour Modes   icon .
 Press the  MENU 11  button briefly to enter the submenu .
 Use the  UP 10/ DOWN 12  buttons to select the desired palette .
 Press the  MENU 11  button briefly to confirm the selection .
Note : you can also switch from a selected color palette to the  White hot  palette with a
long press of the  DOWN 12 button .
Tip : to preserve brightness and contrast values when switching palettes , activate User
Mode .