Pulsar TELOS - Page 41

This option allows you to configure the appropriate access level to your device made
available to the Stream Vision 2 application .
Owner  level .  A Stream Vision 2 user has full access to all device functions .
Guest  level . A Stream Vision 2 user only has access to the real time video
stream from the device .
 Use the  UP 10/ DOWN 12  buttons to select the  Access Level Setup
icon .
 Press the  MENU 11  button briefly to enter the submenu .
 Select the access level with the  UP 10/ DOWN 12  buttons .
 Press and hold the  MENU 11 to confirm your selection and exit from the
submenu .
Wi - Fi Band
This setting helps to solve smartphone connection issues in the following cases :
If your smartphone does not support 5 GHz Wi - Fi band , switch to 2.4 GHz .
Many Wi - Fi networks cause interference . In this case , switching between Wi - Fi
bands can improve the connection between the device and the smartphone .
 Use the  UP 10/ DOWN 12  buttons to select the  Wi - Fi Band icon .
 Press the  MENU 11  button briefly to enter the submenu .
 Press the  UP 10/ DOWN 12 buttons to select the Wi - Fi bandwidth – 5
GHz  or  2.4 GHz .
 Confirm your selection with a short press of the controller  MENU 11  button .
Microphone